Production Capabilities

FINISHED WIDTHS 
18" TO 51" 

FINISHED GAUGES
.00025" - .003"

TYPICAL YIELD
 

CASTING
Two continuous casters with maximum O.D. capability of 60" and maximum width of 65"

ALLOYS

TEMPERS
Annealed, Dead soft (0) - Full Hard (H-19) (As-Fabricated)

MAXIMUM O.D.
28.5"

CORE I.D.
3" or 6", DOM steel, extended and notched

TOLERANCE
+/- 10%

CAPACITY
30 MM lbs

MINIMUM ORDER
3,500 lbs.

WETTABILITY
"A" or "A/B" (end-user option)

BARRIER PROPERTIES EXAMPLES
  - 0.001-inch foil and thicker is impermeable to moisture and oxygen
  - .00035-inch foil has a water vapor transmission rate of 0.02 grams or less per
    100 square inches
  - 0.00035-inch foil, when laminated to an appropriate film, produces a vapor
    transmission rate of zero

APPEARANCE
  - The surface will be uniform, clean, and free from streaks, scratches, 
    and oil staining. 
  - Foil will be free of corrosion for six months from the shipping date.       

PINHOLE COUNT

SPLICES
  - Ultrasonic welds
  - Maximum of two per roll on 80% of order
  - Maximum of five per roll on 20% of order

FDA COMPLIANCE
FDA 21 CFR 178.3910 (Title 21, Part 178, Section 3910)

PACKAGING
  - Material is packed suspended in aluminum racks with the ends protected
    from abrasion and moisture. 
  - Each coil is marked with alloy, temper, gauge/width, net/gross weight,
    and coil number. 
  - Certificate of Compliance will accompany each shipment. Certificate of
    Analysis is available upon request.